All Roadside Services
Email: info@rallyesen.com
Click To Call (866) 235-2512

The best ways to Deal with a Dead Car Battery

In this article, we include some tips if you are experiencing a dead car battery. Try these techniques before changing out the vehicle’s battery or before calling for jump start car service or a tow.

Realizing a car’s battery is dead and the vehicle won’t start will ruin the day for most people. In many situations, you will certainly know why your car battery has lost its power, like leaving the lights or the car’s radio on overnight. Nevertheless, there will certainly be times when the true reason won’t be so obvious. Getting on with your day is what you desire most so regardless of the reason for the battery’s power loss you simply want it working once more. After that, your next concern is identifying if this trouble is most likely to occur again in the future, so you may have to effectively service your battery or have it changed totally.

When absolutely nothing happens when you try to start your car with the ignition key, that is a sure sign it’s due to a dead car battery and you may need help from a jump start car service provider. However, if your car does attempt to start but doesn’t, it can suggest other mechanical issues are at fault however it’s an excellent chance it is the car battery. Treat the issue as you would treat the initial until you locate real reason because the repair for it is the simplest. Sometimes, even if the problem is the automobile’s alternator, the following techniques of dealing with a dead car battery will get you on the road once again to address the more immediate issue.

Method 1: Clean the battery terminals

If there is white, blue, or green powdery buildup around your terminals, this can prevent a decent connection between your battery and the jumper cable. Cleaning them could recover this connection sufficient enough to obtain the car started again, yet– because the buildup is of acid– you must promptly have your battery examined to get to the root of the issue. A jump start car service provider can assist with this.

Materials Needed

• Baking soda or Sodium Bicarbonate
• Gloves (plastic or latex)
• Rag
• Socket wrench
• Toothbrush or various other rigid plastic brush
• Water

Step 3: Remove the wires. Remove the “negative” cable from the battery terminal (indicated by a black color or minus sign) with a socket wrench and after that the positive cable from its terminal (significant by a red shade or plus indication), taking care that the 2 cords’ ends do not make contact.

• Tip: It is advisable to wear some kind of gloves or hand protection whenever touching corrosion on an automobile battery due to the fact that the acidic material will certainly aggravate your skin.

Step 2: Sprinkle baking soda. Liberally spray baking soda over the terminals to counteract the acid.

Step 3: Wipe away the accumulation. Dampen a rag with water, then wipe the buildup and excess sodium bicarbonate (baking soda) from the terminals. If the buildup is more than your rag can eliminate, try cleaning it off initially with an old toothbrush or other brush.

• Warning: Do not make use of a steel brush or anything with metal bristles to try to eliminate buildup from battery terminals because of a threat of shock.

jump start car service

Step 4: Replace the battery cables. Change the car battery jumper cable to their respective terminals, beginning with the positive then the negative. Try the vehicle’s ignition once more. If it doesn’t start, try the other methods listed below.

Method: Jump-start your vehicle.

If you have accessibility to one more running automobile, jump-starting your dead car battery is likely your ideal option to swiftly get your car started. Alternatively, you can contact All Roadside Services for jump start car service. As soon as this is done, you might not have anymore problems, however– if you see yourself needing a jump-start regularly—may just need to replace your car’s battery with a new one.

Materials Needed.

• Donor auto with functioning battery.
• Jumper cables.

Step 1: Have both automobiles near each other. Park the donor car close enough to your car so that the jumper cable ends will reach between the two batteries, then open up the hoods of both cars.

Step 2: Hook up the dead vehicle. Attach among the positive jumper cord ends (suggested by a red color and/or a plus indicator) to the positive battery terminal of the dead battery, after that connect the closest negative cord end (marked by a black shade and/or a minus sign) to the dead battery’s negative terminal.

Step 3: Hook up the donor car. Connect the other positive jumper cable end to the donor car’s battery and after that attach the connect the negative cable to the donor vehicle’s negative terminal.

Step 4: Start the donor auto. Starting the donor car’s engine and let it to run for a few minutes or more.

Step 5: Start the dead car. Attempt to start the car. If it doesn’t start, check all connections and try it again. If it still doesn’t start have the battery tested and replace it with a new one if needed.

Method 3: Use a battery charger.

With a battery charger you can bring new life to a dead car battery. This takes a bit longer than a jump-start but works if you have the time to wait. You can always contact All Roadside Services for jump start car service as well.

jump start car service
Step 1: Hook up the battery charger. Attach the positive end of the battery charger to the positive battery terminal on your battery then the negative end to your negative terminal.

Step 2: Plug in the battery charger. Plug the battery charger a power outlet or other power source and switch it to on.

Step 3: Turn off the charger. When the charger indicates, your battery has a full charge (frequently after a 24-hour wait), turn the battery charger off, remove the cables from your terminals in reverse order.

Step 4: Try starting your car. If it does not turn over, chances are you need a new battery.

• Warning: Although the majority of modern battery chargers have an automatic shut-off that triggers it to quit charging when your battery is full, older or less expensive charges may not have this function. If it is not plainly shown on the battery charger or says it in the instruction guide that it includes the shut-off attribute, you will need to keep an eye on the process and switch off the charger yourself when done.

Method 4: Determine if replacement is needed.

Materials Needed.

• Multi-meter.
• Voltmeter.

Step 1: Test your battery with a multi-meter. If you have a multi-meter on hand, you could examine your battery for leaks following your product’s directions.

• An analysis of 50 mA or much less is acceptable, however a greater reading indicates the have to get a replacement. The problem is this still won’t solve your current situation with a dead car batter and you will need to use one of the previous techniques to get your car started.

Step 2: Test your battery with a voltmeter. A voltmeter is also efficient in evaluating your battery’s charging system, but it requires your vehicle to be running.

• This attaches to your battery terminals in the same way as a battery charger, and a reading of in between 14.0 and 14.5 volts is typical with anything less showing you require a new alternator.

All Roadside Services is a nationwide Emergency Towing & Roadside Assistance Service Company. If you have a dead car battery and need jump start car service, need towing, fuel delivery, flat tire change, or locked your keys in the car anywhere in our area of service don’t hesitate to contact our office and speak to our professionally trained staff members. A unit will be dispatched to your location quickly. We are the Emergency Towing & Roadside Assistance Service Company that never sleeps. We are available to assist you 24 hours a day, 7 days a week. Our units are equipped with the latest tools to get you safely back on your way.

For more information about our jump start car service or for immediate dispatch to your location, call (866) 235-2512.